+91 99989 72525
jayendrasalescorp.jsc@gmail.com
Technical specification | Light duty lathe machine |
Length of bed: | 1060 m.m. (3’ 6”), 1370 m.m. (4’ 6”), 1600 m.m. (5’ 3”), 1825 m.m. (6’) |
Admit between center: | 350 m.m. (3’ 6”), 650 m.m. (4’ 6”), 875 m.m. (5’ 3”) 1100 m.m. (6’) |
Width of bed: | 236 m.m. |
Type of bed: | 2 V & 2 Flate |
Height of center: | 165 m.m. |
Max. swing over bed: | 305 m.m. |
Max. swing in gap: | 495 m.m. |
Max O.D. turning: | 150 m.m. |
Length of cross slide: | 355 X 135 m.m. |
Chuck plate O.D.: | 178 m.m. |
Movement of compound slide: | 200 m.m. |
Spindle bore: | 75 m.m. |
Spindle nose dia thread: | 40 m.m. |
Taper bore in spindle: | 59 m.m. (8 T.P.I.) |
No. of spindle speed & range: | MT 3 |
Tale stock spindle dia: | 8 (40 to 950 RPM) |
Movement of tale stock spindle: | 38 m.m. |
Taper nose of tale stock spindle: | 95 m.m. |
Lead screw dia & thread: | MT 3 |
No. thread & pitch range: | 25 m.m. – 4 T.P.I |
V. Belt: | Inch 17 (2 to 24 T.P.I.) Metric : 13 (1 to 6 Pitch) |
Side counter: | B 42 |
Electric motor: | 1 HP 1440 RPM 3 Phase |
Technical specification | Medium duty lathe machine |
Length of bed: | 1370 m.m.(4’ 6”), 1676 m.m.(5’ 6”), 1825 m.m.(6’). |
Admit between center: | 450 m.m. (4’ 6”), 750 m.m. (5’ 6”), 900 m.m. (6’) |
Width of bed: | 280 m.m. |
Type of bed: | 2 v & 2 Flate |
Length of gap in bed: | 125 m.m. |
Height of center: | 215 m.m. |
Max. swing over bed: | 380 m.m. |
Max. swing in gap: | 600 m.m. |
Max O.D. turning: | 127 m.m. |
Length of cross slide: | 380 X 170 m.m. |
Chuck plate O.D.: | 200 m.m. |
Movement of compound slide: | 200 m.m. |
Spindle bore: | 90 m.m. |
Spindle nose dia thread: | 50 m.m. |
Taper bore in spindle: | 76.2 m.m. (6t.P.I) |
No. of spindle speed & range: | MT 6 |
Tale stock spindle dia: | 6 (93 to 624 RPM) |
Movement of tale stock spindle: | 50 m.m. |
Taper nose of tale stock spindle: | 100 m.m. |
Lead screw dia & thread: | MT 4 |
No. thread & pitch range: | 32 m.m. – 4T.P.I. |
Electric motor: | Inch 19(4 to 48 T.P.I.) Metric : 13 (0.5 to 7 Pitch) |
Side counter: | 1.5 HP 1440 RPM 3 Phase |
Technical specification | Heavy duty lathe machine (with self, without selft & without center) | Light duty lathe machine(with self, without selft & without center) |
Length of bed: | (4’) 1215 m.m. | (3’ 6”) 1065 m.m. |
Width of bed: | 320 m.m. | 280 m.m. |
Type of bed: | 2 V & 2 Flate | 2 V & 2 Flate |
Height off center | 250 m.m. | 210 m.m. |
Spindle nose dia thread: | 6 T.P.I. | 8 T.P.I. |
No. of spindle speed & range: | 2 (465 to 835 RPM) | 2 (615 to 960 RPM) |
Self shaft dia: | 32 m.m. | 25 m.m. |
Self Gear: | 12 D.P (95-90-80-75-60-30) | 14 D.P (95-90-80-75-60-30) |
Chuck plate: | 200 m.m. | 200 m.m. |
Technical Specification | HEAVY DUTY LATHE MACHINE *** | ||
Length of Bed : | 5'6" (1676 m.m.), 7' (2134 m.m.), 9' (2743 m.m.), 10' (3048 m.m.), 12' (3657 m.m.), 14' (4268 m.m.) | ||
Admit Between Center : | 380 m.m.(5'6"), 835 m.m. (7'), 1440 m.m. (9'), 1740 m.m. (10'), 2340 m.m. (12'), 2955 m.m. (14') | ||
Type of Bed : | 2v & 2 Flat | Spindle Bore : | 52 m.m. |
Width of Bed : | 323 m.m. | Spindle nose dia thread : | 76.2 m.m. (6 T.P.I.) |
Length of Gap in Bed : | 150 m.m. | Taper Bore in Spindle : | MT 6 |
Heigh of Center | 250 m.m. | No. of Spindle Speed and Range : | 8 (31.3 to 595 RPM) |
Max. Swing orer Bed : | 450 m.m. | Tale Stock Spindle dia : | 50 m.m. |
Max. 0. D. Turning : | 405 m.m. | Movement of Tale Stock Spindle : | 175 m.m. |
Length of Cross Slide : | 280 x 200 m.m. | Taper Nose of Tale Stock Spindle : | MT 4 |
Max. Swing in Gap : | 775 m.m. | Lead Screw dia & Thread : | 38 m.m. - 4 T.P.I. |
Movement of Cross Slide : | 280 m.m. | No. Thread & Pitch Range : | Inch 17 (2 to 24 T.P.I.) Metric : 13 (1 to 6 Pitch) |
Chuck Plate 0. D. : | 250 m.m. | V. Belt : | C 74 & Flate Belt 50 x 1900 m.m. |
Movement of Compound Slide : | 140 m.m. | Electric Motor : | 2 HP 1440 RPM 3 Phase |
+91 99989 72525
jayendrasalescorp.jsc@gmail.com