+91 99989 72525

  jayendrasalescorp.jsc@gmail.com

EMPIRE LATH MACHINE

HEAVY DUTY

Discription:

LENGTH OF BED : 5’6”-7”-9”12” FEET
HEIGHT OF CENTER : 10” (250MM)
MAXI. SWING OVER BED : 18” (455MM)
WIDTH OF BED : 12 ¾” (323MM)
LENGTH OF GAP : 12” (305MM)
LANTH OF GAP IN FRONT OF FACE PLATE : 8” (203MM)
SPINDLE HOLLOW : 2 1/8”  (52MM)
LEAD SCREW : 4 TPI
V-BELT / FLAT BELT : C-72 / 2” * 78”
MAXI SWING OVER CARRIAGE : 10” (255MM)
RPM CAN BE OBTAINED LOW/HIGH : 25/450
POWER REQUIRED : 3HP – 2HP
BED LENGTH ADMIT BETWEEN CENTER MACHINE WT. APPROX
FEET MM MM KG.
5’ – 6’ 1675 508 1350
7” 2135 965 1500
9’ 2740 1575 1800
10’ 3045 1880 2000
12’ 3655 2490 2300

STANDARD ACCESSORIES:
Face Plate, Chuck Plate, Dead Center-2, Center Adoptor, Change Gear Sets For Inch & MM Threads Tool Post Key, Motor Pulley.

MEDIUM DUTY

LENGTH OF  BED 4’6”-5’3”-6’-7’
HEIGHT OF CENTER 81/2” (215MM)
WIDTH OF BED 11” (275MM)
SPINDLE BORE 21/8” (52MM)
WIDTH OF SURFACE 7” (175MM)
APPRON HEAVY 15” (380MM)
LEAD SCREW 4 TPI
INCH THREAD 4 TO 48 TPI
MATRIC THREAD 1 TO 7 MM
POWER REQUIRED 1PH – 1.5 HP

Hardened Bed Ways, Double V-Belt, Heavy Tool Post pedestal bearing No. 6206

BED LENGTH ADMIT BETWEEN CENTER MACHINE WT. APPROX
FEET MM MM KG.
4’ – 6’ 1350 520 700
5”- 3” 1575 750 750
6’ 1800 960 800
7’ 2100 1300 880

STANDARD ACCESSORIES:
Face Plate, Chuck Plate, Dead Center-2, Center Adoptor, Change Gear Sets For Inch & MM Threads Tool Post Key, Motor Pulley.

LIGH MEDIUM DUTY

LENGTH OF  BED 4’6”-5’3”-6’ FEET
HEIGHT OF CENTER 71/2” (190 MM)
WIDTH OF BED 9 1/2” (240 MM)
SPINDLE BORE 1.57  (40 MM)
WIDTH OF SURFACE 7” (180 MM)
LEAD SCREW 4 TPI
INCH THREAD 4 TO 48 TPI
MATRIC THREAD 1 TO 7 MM
POWER REQUIRED 1 PH – 1 HP
BED LENGTH BETWEEN CENTER MACHINE WT. APPROX
4’ – 6” 1350 600 535
5’-3” 1575 830 585
6” 1800 1050 635

STANDARD ACCESSORIES:
Face Plate, Chuck Plate, Dead Center-2, Center Adoptor, Change Gear Sets For Inch & MM Threads Tool Post Key, Motor Pulley.

LIGH DUTY

LENGTH OF  BED 3’6”-4’6”-5’”-6’ FEET
HEIGHT OF CENTER 61/2” (165 MM)
WIDTH OF BED 9 1/2” (240 MM)
SPINDLE BORE 1.57  (40 MM)
WIDTH OF SURFACE 43/4” (120 MM)
LEAD SCREW 4 TPI
INCH THREAD 4 TO 48 TPI
MATRIC THREAD 1 TO 7 MM
POWER REQUIRED 1 HP
BED LENGTH ADMIT BETWEEN CENTER MACHINE WT. APPROX
3’6” 750 300 450
4-6” 1350 650 500
5’-3” 1575 880 550
6” 1800 1100 600

STANDARD ACCESSORIES:
Face Plate, Chuck Plate, Dead Center-2, Center Adoptor, Change Gear Sets For Inch & MM Threads Tool Post Key, Motor Pulley.