+91 99989 72525

  jayendrasalescorp.jsc@gmail.com

Sterling Lath Chuck

STANDARD CHUCK 3 JAWS

STANDARD CHUCK 4 JAWS

STANDARD CHUCK 6 JAWS

BEARING RING TURNING CHUCK 3 JAWS

BEARING RING TURNING CHUCK 4 JAWS

BEARING RING TURNING CHUCK 6 JAWS

MASTER GRIPING CHUCK 3 JAWS

SPECIAL PORPOUSE CHUCK 4 JAWS

BIG BORE CHUCK 3 JAWS

OUR STANDING FEATURES

Body :-  The body is made from high tensile graded grey cast iron with additional metals for long  life, wear resistance and high strength. The body has a hardness of 180 bhn and tensile strength of more than 450 mpa.

Jaws :-  The jaws are made of case hardening alloy steel having low carbon, nickel, chromium& molybdenum having hardness between 58 to 62 hrc. Special attention is paid to the heat treatment process of the jaw’s teeth to avoid breakages of the jaw’s teeth. Jaw’s teeth are chamfered to reduce the friction and to impart longer life to the scroll plate.

Scroll Plate: - The scroll plate is made of high tensile, wear resist alloy steel having nickel, chrome & molly. It is precision machined, hardened and ground for smooth operation, higher accuracy and longer life.

Pinion: - The pinion is made of forged, high tensile alloy steel having hardened and ground bearing diameters. Pinion is provided with stub teeth which withstand very high tightening load. It is specially heat treated to obtain high strength.

Operating Key: - The operating key made of steel is provided with the chuck.

Accuracy of the Chuck: - The accuracy (run out) of the chuck conforms to the IS standard.

PRODUCT RANGE :
110,165,200,250,315,375MM Available in 3-4-6 jaws

  • STANDARD CHUCK,
  • BIG BORE CHUCK
  •  BEARING RING TURNING CHUCK
  • CRANKSHAFT GIRINDING CHUCK,
  • ACCURACY ADJUSTMENT CHUCK,
  • MASTER GRIPING CHUCK,
  • C.R . BEARING CHUCK
  • FLATJAWS GRIPING CHUCK
  • SPECIAL PURPOSE CHUCK

AS PER CUSTOMER REQUIREMENT

Technical Specifications:

CHUCK SIZE BODY O.D. BODY HIGHT P.C.D CH ID JL JW SQH BOLT SIZE
110MM 110 60 95 22 80 43 16 9.25 M 6
165MM 165 68 140 42 125 65 19 9.25 M 10
200MM 200 75 176 55 160 80 22 11.25 M10
250MM 250 84 224 76 200 100 28.5 12.7 M 12
315MM 315 95 286 105 265 109 28.5 12.7 M12
375MM 375 95 350 140 320 140 28.5 16.5 M 12

Note :- all dimensions are approximate and illustrations are not biding as to detail. All dimensions, specification and design are subject to change without any notice.