+91 99989 72525

jayendrasalescorp.jsc@gmail.com

Harisinghandsons

STANDARD ACCESSORIES:

• Automatic Lubrication Pump

• Swiveling Vice

• Crank Handle

• Motor Pulley

EXTRA ACCESSORIES:

1. Key way cutting attachment

2. Automatic tool lifting device

3. Automatic feed to the tool slide

4. Rapid feed system with control panel

5. Allen key set

6. V-belts

7. Screw driver

8. Electric motor & starter with fitting & wiring

9. Spanner set

10. Oil can

11. Tool box

DIMENSIONS

MODEL HS-18 HS-24 HS-30 HS-36 HS-42
A-CAPACITY 18” 24” 30” 36” 42”
Length of Ram Stroke 457 mm 610 mm 762 mm 915 mm 1070 mm
Length of Ram 960 1232 1410 1651 2108
Length of Width Ram Bearing 700x270 867x300 1020x330 1130x330 1600x330
Ma. & Min. Distance
From Table of Ram 360x75 450x76 510x75 565x102 600x102
B-TABLE
Working Surface of Table 457x305 610x370 762x390 915x457 1078x533
Max. Table Travel Horizontal 488 635 787 940 1075
Max. Table Travel Vertical 330 380 450 525 585
Angular Movement of Table
On Either Slides 60L 60R 60L 60R 60L 60R 60L 60R 60L 60R
C-TABLE
(Max Vertical of Tool Slide) 152 190 203 255 300
Maximum Swivel of Tool Head 60L 60R 60L 60R 60L 60R 60L 60R 60L 60R
E-SPEED & FEEDS
Dia of Clutch Pulley 311 311 311 380 380
Range of Ram Speeds 4 4 4 4 4
(Stroke Per Minute) 16,32,64,96 14,28,42,62 8,16,32,48 10,20,30,50 8,16,32,48
Dia of Motor Pulley 70 70 76 88 88
Range of Table Feed Per Stroke of Ram 0.200 0.229 0.229 0-22 To 0-88 0-22 To 0-88
Range of Tool Head Feed hand feed hand feed hand feed hand feed hand feed
Automatic Tool Head Feed & Tool Lifting On order On order On order On order On order
F- DRIVE ELECTRICAL EQUIPMENT
Power Supply 2 HP (1.5 Kw) 3 HP (2.25 Kw) 5 HP (3.75 Kw) 7.55 HP (5 Kw) 10 HP (7.5 Kw)
Speed RPM 1440 RMP 1440 RMP 960 RMP 960 RMP 960 RMP
Main Switch Starter (Push Button Type) 3.5 AMP 5 AMP 5 AMP 5 AMP 3.5 AMP
Weight (Approx) 1200 kgs. 1850 kgs. 2300 kgs. 3500 kgs. 4000 kgs.